- *Requires a Stainless Steel or hard plastic hammer to install. This ensures that glue and bolt stay in place while the glue cures.
- 6mm Twisted Wire
- 14mm, or 1/2" dia. hole.
- Length 100mm
- AISI 316 (A4) Stainless Steel.
* When placing any glue-in bolt, always ensure that you "dry test" the placement by inserting the bolt that you intend to use into the hole! This process is highly recommended to be certain that the drill hole has the proper diameter and depth. This step should always be done prior to injecting any glue into the hole!