Hand TIG welded these are the strongest bolt you can get into a small diameter drill hole. Diagonal end to prevent rotation and eliminate the need to counter-sink the bolt's eye.
- Breaking Strain-35kN
- 10mm or 7\16" dia. hole
- 80mm (Normal Rock)
- AISI 316 (A4) Stainless
* When placing any glue-in bolt, always ensure that you "dry test" the placement by inserting the bolt that you intend to use into the hole! This process is highly recommended to be certain that the drill hole has the proper diameter and depth. This step should always be done prior to injecting any glue into the hole!