It is manufactured using 8mm, 316 SS wire stock. It has a 16mm diameter shaft, (fits a 3/4"- 11/16" or 18mm dia. drill drill hole) and is economically priced.
* This anchor does not need a second ring to allow the Pig Tail to stand at 90° to the rock for chafe-free running of the rope.
- 8mm Twisted Wire
- 10mm 316 SS Pig Tail Included
- 18mm, 11/16" or 3/4" dia. hole.
- 150mm shaft length
- AISI 316 (A4) Stainless Steel
* Please allow 3-6 weeks for delivery on all custom orders
* When placing any glue-in bolt, always ensure that you "dry test" the placement by inserting the bolt that you intend to use into the hole! This process is highly recommended to be certain that the drill hole has the proper diameter and depth. This step should always be done prior to injecting any glue into the hole!